IAR KickStart Kit for LPC2129

IAR KickStart Kit for LPC2129 contains all the necessary hardware and software and allows you to develop and test your applications:

LPC2129 Development board

• MCU: LPC2129 16/32 bit ARM7TDMI-S with 256K Bytes Program Flash, 16K Bytes RAM, RTC,4x 10 bit ADC 2.44 uS, 2x CAN, 2x UARTs, I2C, SPI, 2x 32bit TIMERS, 7x CCR, 6x PWM, WDT, 5V tolerant I/O, up to 60MHz operation • Standard JTAG connector with ARM 2x10 pin layout for programming/debugging with ARM-JTAG • Three on board voltage regulators 1.8V, 3.3V and 5V with up to 800mA current • Single power supply: +7-9VDC required • Power supply status LED • Power supply filtering capacitor • Two channel RS232 interface with two RS232 SUB-D 9 pin connectors • Two channel CAN interface with drivers and two SUB-D 9 pin connectors • iButton interface circuit • Frequency input connector • Two buttons • Two status LEDs • Potentiometer connected to AIN • RESET circuit with external control of the NXP ISP utility via RS232 • RESET button • DBG jumper for JTAG enable • BSL jumper for bootloader enable • JRST jumper for enable/disable external RESET control by RS232 • 10 Mhz crystal • Extension headers for all uC ports • PCB: FR-4, 1.5 mm (0,062"), green soldermask, white silkscreen component print • Dimensions: 115x80 mm (4.5x3.2") • Schematics included

IAR Embedded Workbench® for ARM

IAR Embedded Workbench is an Integrated Development Environment with a complete and easy-to-use set of C/C++ cross compiler and debugger tools for professional embedded applications. • KickStart 32KB C/C++ compiler for ARM • Project manager • Editor • Linker and librarian tools • C-SPY® debugger • Full integration with IAR J-Link Complete upgrade path available from IAR Systems.