|
LPC PRO is a fully-featured flexible USB special programmer that supports a large variety of integrated circuits:
-
The entire Philips P87LPC9xx device families
-
The entire Philips P89LPC7xx device families
-
Serial EEPROMS ( SPI and I2C )
Programming Modes
Advanced hardware feature
-
High performance , low cost, small light , portable and professional design.
-
Dimension: 121mm/5”(L) × 82mm/3”（W） × 27mm/1”(H)
-
High speed USB port interface
-
Powered through USB, LPC PRO requires no external power supply.
-
Over-current and over-voltage protection for programmer hardware .
Software designed with you in mind
-
Uses manufacturer approved algorithms
-
Comfortable and easy to use control program ,Windows 98/Me/NT/2000/XP compatible.
-
It can handle file in binary/machine code, Intel Hex, Motorola , Tektronix, Extend Tektronix etc.
-
Fully integrated Windows object file editing environment.
-
Serial numbers can be generated and programmed into Code or Data locations automatically.
-
Virtually supports you, and free software updates are available!
Special Description
User- selectable programming mode -- Dual supports parallel programming on the socket or in-circuit programming ( ICP )
You have freedom to choose the optimal device for your design. LPC PRO directly supports in-circuit programming using a dedicated ICP connector and an included cable. You can select parallel mode programming on the high quality socket for mass-production applications. ICP mode is ideal for design engineering and low-volume production.
Supports a wider range of Philips P89LPCxxx device --True LPC Programmer
Supports ICP specification, on board program function for Philips P89lpc9xx device. On-board processor let it handle today’s and tomorrow’s (without family-specific module) P89lpc9xx device.
Easy operation--Get to work immediately
The programming software's easy-to-use graphical interface eliminates your learning curve--you don't need the manual! You can simply type the device vendor's name and part number, the software will select the proper driver automatically; you don't need to search one by one through long lists of devices.
Project file save option
You can save a configuration project file which contains the device selection, the buffer data and all the programming setup options, This file can be called upon at any time for future use without having to go through the set up procedure again.
A powerful multiprogramming
Attaching of more LPC PRO programmers to the same PC (through USB port) is achieved a powerful multiprogramming system with as much chips supported as LPC PRO can and without obvious decreasing of programming speed. It is important to know, there is a concurrent multiprogramming - each programmer works independently and each programmer can program different chip, if necessary.
Supported device
The software included with the LPC programmer supports the following devices, as of Mar. 2005:
The entire Philips P87LPC9xx device families
-
P89LPC90x： P89LPC901/902/903/904/906/907/908
-
P89LPC910x： P89LPC9102/9103/9107
-
P89LPC91x： P89LPC912/913/914/915/916/917
-
P89LPC92x： P89LPC920/921/922/924/925
-
P89LPC93x： P89LPC930/931/932/933/934/935
The entire Philips P89LPC7xx device families
-
P87LPC759 P87LPC760 P87LPC761 P87LPC762
-
P87LPC764 P87LPC767 P87LPC768 P87LPC769
-
P87LPC776 P87LPC777 P87LPC778 P87LPC779
Serial EEPROMS ( SPI and I2C )
-
Series EEPROMs ( such as 24, 25, 93 families ) from ATC, ATMEL, CATALYAT, FAIRCHILD,
-
HOLTEK, ISSI, LINKSMART, MICROCHIP, ROHM, ST,XICOR, RAMTRON etc..
Package includes
-
LPC PRO programmer
-
USB cable
-
ICP cable
-
Software
-
Warranty card
|
