| | |
|
| |
| | |
|
Visit the LPCZone, NXP's new online training and community portal!
We now have the cool mbed module for LPC1768!
|
LPC1343 QuickStart Board
|
|
8 in stock!
Item Number: EA-QSB-1343
Manufacturer: Embedded Artists
Manufacturer Part No: EA-QSB-012
|
Embedded Artists' LPC1343 QuickStart Board lets you get up-and-running
quickly with NXP's Cortex-M3 LPC1343 microcontroller. The small sized
board offers many features that ease your learning curve and speed up
your program development.
Download code to the board by using:
-
The USB-ISP mode where the board will enumerate as a USB Mass storage device
on a Windows PC. Just copy the compiled binary file to the storage device.
-
Use the free LPCXpresso IDE/Debugger
together with, for example, an LPC-Link (not included), a 10-pos IDC ribbon cable
(not included) and
connect to the SWD interface (10-pin JTAG connector) on
the board. This allows you to both download and debug
code
on the board.
-
Use a debugger and JTAG adapter of your choice which supports the Cortex-M3 ARM core and more specifically
the NXP LPC1343 microcontroller. You might need an adapter between
your JTAG solution and the target board.
Embedded Artists' LPC1343 QuickStart Board lets you get up-and-running
quickly with NXP's Cortex-M3 LPC1343 microcontroller. The small sized
board offers many features that ease your learning curve and speed up
your program development.
The LPC1343 QuickStart Board is very low cost and can be used for
prototyping/development as well as for low-volume production.
| Processor
|
NXP's Cortex-M3 LPC1343 microcontroller
in 33-pin HVQFN package.
|
| Program Flash
|
32 KB
|
| Data Memory
|
8 KB
|
| Clock Crystals
|
12.000 MHz crystal for maximum execution speed and
standard serial bit rates, including USB requirements.
The LPC1343 runs at frequencies up to 72 MHz.
|
| Interfaces / Connectors
|
• All LPC1343 I/O pins are available on edge expansion connectors, in DIL-30 structure
suitable for bread board prototyping (dual 15 pos, 100 mil/2.54 mm pitch rows, 700 mil/17.78 mm apart).
• On-board USB Device interface, with mini-B USB connector and proper ESD protection.
|
| Dimensions
|
21 x 40 mm
|
| Power
|
Flexible powering, with on-board 150mA 3.3V voltage regulator
(can be powered from USB connector or an external +5V supply).
|
| Connectors
|
• All LPC1343 I/O pins are available on connectors.
• mini-B USB connector.
• SWD/JTAG connector (0 mil/1.27 mm pitch, standard SWD/JTAG connector).
|
| Other
|
• 32 Kbit I2C E2PROM for storing non-volatile parameters.
• Onboard reset generation and reset push-button.
• Push-button for enabling Bootloader mode of the LPC1343.
• LED on pin PIO0_7.
• 2 pcs 1x15 pinlists included, but not soldered.
|
| Processor
|
ARM Cortex-M3 core with speed up to 72 MHz
|
| Flash
|
32 kB
|
| RAM
|
8 kB
|
| Timers
|
• Two 32-bit counter/timers
• Two 16-bit counter/timers
• One Watchdog timer
|
| PWM
|
13 - Using timers 0-3
|
| ADC
|
10-bit with input multiplexing among 8 pins
|
| Serial interfaces
|
1xUART, 1xI2C, 1xSSP
|
| USB
|
Full-Speed USB Device Controller with on-chip PHY
|
| Other
|
• Serial Wire Debug and Serial Wire Trace Port
• Integrated PMU to minimize power consumption
• Three reduced power modes: Sleep, Deep-sleep, and Deep power-down
• Code Read Protection (CRP) with different security levels
|
| Links
|
• Product page
• Datasheet
• User's Manual
• Errata
|
The following resources are available for download from our support
site after registration of the LPC1343 QuickStart Board.
Documents
- User's Manual
- Board Schematics
Software
-
Several sample applications
|
|
Our site is
checked daily by:
Our online transactions
are performed by:
We accept:
We are part of the
ARM Connected
Community:
Check out the
LPC2000 Group:
Next major US
embedded event:
Next major
embedded event
in Europe:
|
|