| | |
|
| |
| | |
|
Visit the LPCZone, NXP's new online training and community portal!
We now have the cool mbed module for LPC1768!
|
LPCXpresso / MBED Base Board
|
In stock!
Item Number: EA-XPR-021
Manufacturer: Embedded Artists
Manufacturer Part No: EA-XPR-021
|
PERFECT FOR THE NXP CORTEX-M0 LPC1100 DESIGN CHALLENGE!
The LPCXpresso Base board makes it possible for you to get started with experiments
and prototyping immediately.
The Base board can also be used together with the mbed module.
Overview
The LPCXpresso base board is ideal when you need to do prototyping work
or when you wish to learn more about a certain microcontroller. It
works with the LPCXpresso boards and with the mbed module. See the
Specification tab for all details.
| Common features
|
• Socket for LPCXpresso and mbed module
• 50 pin expansion dual row pin list connector (male, 100mil pitch) for
simple connection external designs and to a logic analyzer
• 50 pin expansion dual row header connector (female, 100mil pitch) for simple connection to breadboard
• Battery powering (small coin battery)
• USB interface
• Reset pushbutton
|
| Digital IO
|
• RGB-LED (can be PWM controlled)
• 5-key joystick switch
• 2 pushbuttons, one for activating bootloader
• Rotary switch with quadrature encoding (timer capture)
• Temperature sensor with PWM output (timer capture)
|
| Analog IO
|
• Trimming potentiometer input (analog input)
• PWM to analog LP-filtering (PWM output and analog input)
• Speaker output (PWM output)
• Oscilloscope probe inout stage
|
| Serial bus - SPI
|
• Shift register driving 7-segment LED
• SD/MMC memory card interface
• Dataflash SPI-NOR flash
|
| Serial bus - I2C
|
• PCA9532 port expander connected to 16 LEDs
• 8kbit E2PROM
• MMA7455L accelerometer with I2C interface
• Light sensor
|
| Serial bus - I2C/SPI shared
|
• SC16IS752 - I2C/SPI to 2xUART bridge; connected to RS232 full-modem interface and one expansion UART
• 96x64 pixel white OLED (alternative I2C/SPI interface)
|
| Serial bus - UART
|
• USB-to-serial bridge, with automatic ISP activation
• RS422/485 interface
• Interface socket for XBee RF-module
|
| Specific mbed module support
|
• CAN bus interface (can be simulated with LPCXpresso)
• Ethernet RJ45 connector with integrated magnetic
|
| Dimensions
|
150 x 180 mm
|
| Power
|
Powered via USB (+5V)
|
The following resources are available for download from Embedded Artists' support
site after registration of the LPCXpresso Base Board.
Documents
- User's Manual
- Board Schematics
Software
-
MCU Drivers
- ADC
- Clock Config
- GPIO
- I2C
- SSP (SPI)
- Timer16, Timer32
- UART
-
Base Board Peripheral Drivers
- Accelerometer
- I2C-EEPROM
- SPI-Flash
- 5-key Joystick
- 7-segment Display
- Light Sensor
- OLED Display, including simple Graphics Library
- PCA9532 (LEDs)
- RGB LED
- Rotary Switch
- Temperature Sensor
- UART2 (I2C/SPI to UART, SC16IS752)
- FAT File System for MMC/SD card (ChaN Fat FS Module)
-
Sample Applications
- Rotary switch controls 7-segment display
- Reading and writing to EEPROM
- Joystick controlling LEDs (PCA9532)
- Listing content on a FAT formatted MMC/SD card
-
Values from light sensor, temperature sensor, accelerometer
and trim potentiometer are written to the OLED display
- Joystick controlling RGB LED
- Speaker - Playing tones
- Speaker - Playing WAV file
- Reading and writing to SPI-Flash
- Reading from UART1 and writing to UART2 (and vice versa)
- Trying to contact an XBee module. Result printed on OLED display
- Values from the BNC is written to the OLED display
- NXP's USB Mass Storage Device example
- NXP's UROM based SB Mass Storage Device example
- NXP's USB HID example
- NXP's ROM based USB HID example
|
List Price: $99.00
Your Price: $85.00
You Save: $14.00 (14 %)
mbed MCU Prototyping Kit for NXP Cortex-M3 LPC1700 series
|
LPCXpresso Board for NXP's LPC1300 series, consisting of the LPC-Link JTAG debugger and a small target board populated with Cortex-M3 LPC1343 device
|
LPCXpresso Board for NXP's LPC1100 series, consisting of the LPC-Link JTAG debugger and a small target board, populated with Cortex-M0 LPC1114 device
|
Prototype Board for NXP LPCXpresso boards (e.g. LPC1343 / LPC1114 LPCXpresso boards) and MBED modules (e.g. LPC1768)
|
|
Our site is
checked daily by:
Our online transactions
are performed by:
We accept:
We are part of the
ARM Connected
Community:
Check out the
LPC2000 Group:
Next major US
embedded event:
Next major
embedded event
in Europe:
|
|