Phyton JEM-ARM JTAG emulator / programmer for ARM (e.g. LPC2000/LPC3000)

• Perfect companion to any Phyton CodeMaster-ARM IDE package (needed for control)
• PC hosted via a USB port
• Supports debugging and programming for ARM7- and ARM9-based devices from Atmel, NXP/Philips, STMicroelectronics, Texas Instruments, Oki, Analog Devices, and others
• Automatically programs flash memory when loads a program for debugging
• Smart programming algorithm reduces flash memory writing time and prevents the MCU memory against premature wearing out
• Supports operations with external program and data memory devices
• Supports real-time and single steps program execution
• Enables two hardware breakpoints
• Enables access to all target microcontroller resources when halted at a breakpoint
• JTAG clock frequency up to 8 MHz
• Automatically adjusts a built-in clock generator to match the RTCK frequency, if cannot detect the RTCK signal sets the Fclk to maximum (for ARM7TDMI-S core only)
• Software tracer records and displays preprogrammed set of parameters when emulation is halted on a breakpoint or after a step
• Requires no external power adapter - gets power from a standard USB PC port
• Featured with an embedded regulator powering the target with a programmable voltage - 1V to 5V/350 mA
• The JTAG logical I/O lines tolerate target input/output signals in the 1 to 5.5V range
• Conveniently controllable from the Phyton CodeMaster-ARM integrated development environment
• The software set includes a C-like script language for hardware testing and device programming
• Dimensions - 4"x2-1/2"x1" (100x70x25 mm)

Additional Information