S-900-D14A Emulation Footprint Adapter for DIP14 (LPC913/912)

The S-900-D14A Emulation Footprint Adapter can be used to do in-circuit emulation of applications with the LPC913 and LPC912 (in DIP14). It converts from A30 (female) to DIP14 and either can be plugged into a DIP14 socket on the target hardware or can be soldered into the DIP14 footprint on the target hardware.

NOTE: If you'd like to do in-circuit emulation with the LPC914 in DIP14 you need the S-900-D14B adapter.

NOTE: In order to use this adapter with an LPC900 In-Circuit Emulator that has a DIP28 ribbon cable connector (e.g. Keil EPM900), you also need the S-D28A Emulation Adapter (see below) which plugs on top of the S-900-D14A adapter and connects it to the 28-pin ribbon cable.

NOTE: In order to use this adapter with an LPC900 In-Circuit Emulator that has a PLCC28 connector (e.g. Ceibo FE-900), you also need the S-C28A Emulation Adapter (see below) which plugs on top of the S-900-D14A adapter and connects it to the PLCC28 connector of the emulator.